Skip to main content

Training Courses

Eddy Current Testing (ET) – Level 1

Eddy Current Inspection (ECI) is a non-destructive testing (NDT) method used to examine conductive materials for surface-breaking defects on coated or uncoated surfaces.

This course is available on the PCN scheme only. 

>

Please note: Level 1 certified personnel shall neither be responsible for the choice of test method or technique to be used, nor for the interpretation of the test results. A Level 2 &/or 3 certified personnel have the ability/responsibility to carry out all tasks a Level 1 certified personnel cannot. If uncertain of the course level you would like to attempt. Please phone the ATL booking team on 01224 890806 Option 1

 

Level 1

Course Overview

Eddy Current Inspection relies on the principles of electromagnetic induction to detect changes in the electrical conductivity or magnetic permeability of the material being inspected. Eddy current testing is particularly effective for inspecting materials that are electrically conductive, such as metals.

Our course is designed for personnel who are responsible for the application of eddy current testing methods for the detection of flaws on metallic materials and welded structures. It is predominantly set against the petrochemical industry for upstream and downstream facilities such as offshore structures, shipping and onshore processing plant including components on lifting and fabrication.

 

Course Objectives

Personnel certified to Eddy Current Inspection Level 1 will have demonstrated an understanding of the subject and a level of confidence to perform Eddy Current Inspection in accordance with NDT procedures.

Within certification, Level 1 personnel may be authorised and qualified by the employer to:

  • Select the technique required to carry out the test method
  • Determine the limitations of its application
  • Understand codes, standards and procedures to identify their application
  • Prepare equipment and settings against reference standard blocks 
  • Perform the inspection tasks
  • Report the results of the inspection
  • Complete and endorse inspection reports and records

 

Course Content

Below is an overview of the standard course, which includes but is not limited to:

  • Visual inspection requirements
  • Certification and qualification
  • Limitations and Advantages of Eddy Current Testing
  • Terms and definitions used in NDT
  • Electrical properties and circuits
  • Principles of magnetism and electromagnetism
  • Eddy Current equipment testing, calibration and function
  • Understanding procedures, codes and standards
  • Application of the Eddy Current Testing Methods and relevant techniques
  • Recording the results 
  • Product technology

 

Course Information

Certification

  • Attendance of training certificate
  • PCN Level 1 certificate, issued by BINDT directly.

Duration

Level 1 is available to all NDT candidates.

PCN Level 1 training and examination is 5 days in total.

Please note: Attendees will be assigned homework modules to complete in the evenings of each course day. These modules are included as part of the total training hours

 

Pre-Requisites

If you are new to NDT/this is your first NDT course, register for the BINDT Online Product Technology course, book: Product Technology Online Training

From the 1st of November 2025, you will be required to complete this  online course before attending your first NDT course and you will be required to attach your Product Technology Certificate while booking in.

EXPERIENCE:

In order to receive a Level 1 qualification, before or after the NDT course the attendee will need to provide (maximum allowable hours in 1 day is 12 hours):

  • 315 hours / 45 days experience 

RECOMMENDATION: Although this NDT course allows direct entry to Level 2, we recommend that participants have some prior knowledge of the NDT method/sector, either through work experience, online research or by studying the course notes. Course notes cover all elements required for NDT examination. You may request collection of course notes after your booking is secure.

For PCN course bookings, the student must fully complete and sign off the PSL Applications as per BINDT requirements:

Send the PCN24/PSL57A & PSL30 to examinations@arraytraining.com

 

Refresher aids / Reference Material:

Theory / Practical Refresher Aids

Recommended Online Resources

 

Price

Course fees cover training, examination, and course material costs.  All PCN costs include a PCN & PED Admin Charge.

For pricing information, call 01224 890806 (Option 1) or email bookings@arraytraining.com

By booking, you agree to our  Terms & Conditions. To secure a booking with Array Training full payment (Self Sponsor) or a purchaser order (Companies) is required upfront.  

Course Dates

No upcoming dates available

Not sure what you need?

If you need help working out the correct training course, exam, or retest, one of our team will be able to help you out.

Get In Touch